Energy Cost Database
What does things actually draw? This database collects typical wattage ranges for 49 common appliances, with the typical daily use, estimated energy and running cost at your rate. Every entry is labelled with its data confidence — these are class averages from rating-plate conventions, not specifications of specific models, and the database never pretends otherwise.
How it works
Each entry gives a typical wattage and the range it sits in, the typical hours of use per day, and — where the appliance cycles, like a fridge or an oven — a typical duty cycle, so the estimated kWh reflects real consumption rather than nameplate × 24 hours. Change the rate at the top and every running cost on the page reprices instantly.
Ranges matter more than points. A “1,500 W” split AC can be a small efficient unit or a large old one; the database shows the span and marks the figure we use for estimates as the typical mid-point. For a specific model, the rating plate and the energy label beat any database — including this one — and each entry links to the calculator that prices your exact numbers.
The same dataset powers the presets in the Appliance Battle and Home Energy Profile, so figures agree across the whole site.
The formula
Running cost = kWh × your rate per kWh
Worked example
A standard fridge-freezer: typical 150 W, in a range of 100–200 W, running 24 hours at a ~35% duty cycle → 150 × 24 × 0.35 ÷ 1,000 ≈ 1.26 kWh/day, about 38 kWh/month — roughly $6.44 a month at $0.17/kWh. An old pre-2000s fridge at 280 W and a 50% duty cycle uses about 3.36 kWh/day — nearly three times as much, which is why it tops so many saving lists.
Frequently asked questions
Are these the specifications of real models?
No. They are typical ranges for appliance classes, compiled from rating-plate conventions and energy-label data. A specific model's plate and label are the authoritative figures for that model.
What does 'data confidence: typical range' mean?
That the wattage is a well-established class average with a published range — reliable for estimates and comparisons, not a measurement of your unit. We label honestly rather than borrow false precision.
Why does the fridge show 24 hours but a low kWh?
Because of the duty cycle: the compressor runs only about a third of the time. The database applies that cycle so the estimate matches what fridges actually consume.
Can I price an appliance that is not listed?
Yes — the kWh Cost Calculator takes any watts and hours. And if a common appliance is missing, tell us via the Contact page and we will add it with its range.