Solar + Battery Simulator

Solar panels alone are half the modern question — the battery is the other half. This simulator models the full daily balance: what your panels generate, what your home uses directly, what the battery stores for the evening, what you still import, and what it all does to the bill and the payback period.

Your system & home

The pre-filled rate is an example rate for the selected country, not a live official tariff. Check the unit rate on your own bill and edit it — your results use exactly the number you enter.

How it works

Generation is system size × peak sun hours, reduced by the system losses you enter. Your consumption is split by the daytime share you set: solar first serves the daytime load directly, surplus charges the battery up to its usable capacity, and the battery discharges in the evening at an assumed 90% round-trip efficiency. Anything left over is exported; anything still missing comes from the grid.

The production curve is a sine model across a 12-hour daylight window whose total area equals the day's generation — a fair-weather shape, shown so you can see when energy arrives, which is what makes batteries valuable. It is not a weather forecast, and no figure here is exact production: real output needs location-specific irradiance data and a site survey, which is why the assumptions are printed with the results.

For a savings-only estimate without a battery, the Solar Panel Savings Calculator and Solar Payback Calculator go deeper on incentives and degradation.

The formula

Daily generation = system kW × peak sun hours × (1 − losses %)
Direct use = min(generation, daily use × daytime share)
Stored = min(generation − direct use, battery kWh × usable %)
Self-consumed = direct use + stored × 0.90 (round-trip efficiency)
Grid needed = daily use − self-consumed · Exported = generation − direct use − stored
Payback = install cost ÷ (annual saving − annual maintenance)

Worked example

A 5 kW system (12 × 410 W ≈ 4.92 kW) with 4.5 sun hours and 15% losses generates about 18.8 kWh/day. A home using 30 kWh/day with 40% daytime share uses 12 kWh while the sun is up: 12 kWh direct, 6.8 kWh surplus — a 10 kWh battery at 90% usable stores all of it and returns about 6.1 kWh in the evening. Self-consumption ≈ 18.1 kWh (60% of use), grid import falls to ≈ 11.9 kWh/day, and at $0.17/kWh the saving is about $3.08/day, $1,125/year before export earnings.

Frequently asked questions

How accurate is the generation estimate?

It is a planning estimate from your sun-hours input. Real generation varies with roof angle, shading, weather and season — a local installer with irradiance data for your postcode will always beat a generic simulator, and our numbers say so.

Why does the battery not cover the whole evening?

Two limits apply: the battery's usable capacity (you cannot store more than it holds) and the 90% round-trip efficiency — about a tenth of stored energy is lost as heat in charging and discharging.

What sun hours should I enter?

Your location's average peak sun hours: roughly 2.5–3.5 for the UK, 3.5–4.5 for much of Germany and central Europe, 4–6 for most of the US, 4.5–6.5 for Australia. Winter figures are far lower than summer — an annual average is the honest input for payback.

Does this include feed-in tariffs or incentives?

Exported energy is valued at the export rate you enter, which is where a feed-in tariff belongs. Purchase incentives are not deducted here — the Solar Payback Calculator handles incentive percentages.